Prado6126

Career Certification Training For Green Installation Examined

It is by using natural resources such as tidal or wind energy - collectively known as 'Green Energy' - that we could meet our daily energy needs. When 'Green', they are all thought to be replenishable and natural. It's interesting to note that in some instances we're actually travelling back in time to utilise some of the older energy skill sets e.g. Wind Power (Windmills etc.) Generally, this is the result of using up to date ideas, specifically those that are planet friendly and eco-efficient.

It is the use of simple renewable energies such as Solar Thermal and Solar Water Heating Collectors, that suits the home environment. To gain electricity from roof panels you would need solar electrical panels (PV's). Following on from this is a process known as Biomass Energy - which includes Boilers burning wood and other fuels. Then we have the ancient energy of the Sun and the heat that comes from it - now called Ground Source Heat Pumps. Lastly, there are two of the more historical forms of energy production - namely Wind Turbines and Hydropower.

Solar Energy Systems: Often called Solar Energy, this is fact based on two types of solar panels each using different ideas to get their results. Initially, there is the process of obtaining hot water from the Sun via Solar Water Heating Collectors. Added to this is the generation of electricity from solar radiation - known as Photovoltaism, or more commonly Solar Electrical panels. Solar Panels themselves need to be away from all light blocks, and should be on south facing roofs at angles of 30 degrees from the horizontal plane.

As a result, Solar Water Power is often considered the most common form of Solar Energy in the UK. With the ability to provide almost half the annual need for hot water in the house, Solar Water heating systems are very important. Typically, to fit this type of equipment will cost between 500 and 1500 pounds for a DIY kit - all the way up to 2-5k for a full professional fitting.

Biomass Energy Based Systems: Including all natural energy forms derived from plant and animal products - such as wood, straw, poultry litter and 'energy crops'. Due to its adaptability, it can produce a range of energy forms - from heat and electricity through to combinations of both. The ability to generate electricity is one of the UK's main green strengths - as it has one of the larger Biomass legacies within Europe. The lack of C02 given out by this form of energy is another positive element in the whole process. Having a tree planted in place of another (that is felled for energy production) helps overall.

'Energy Crops' trees such as Willow and Poplar play a major part in the process - under the banner of Short Rotation Coppice (SRC). Perennial grasses are also responsible for large quantities of dry matter. Equally significant within this practice sit Municipal and Agricultural waste products. One natural offshoot of agricultural work is Agricultural Waste. However, waste derived from food or wood is another biomass entity - called Municipal Waste.

Geo-Thermal Energy Based Systems - The constant energy of the Sun heating the Earth results in both warm water and electricity being produced. By using the ground source temperature of approximately 12 degrees, we can either heat or cool buildings within the UK. Heat pumps are recognised as a very good form of power generation, generally giving back four units of energy for every one used. By using energy from solar electrical panels or wind turbines to power them, heat source pumps can be almost 100 percent renewable in energy production.

Wind Energy Systems: Wind Energy as a sustainable source of energy has been going on for millennia. Whether to your home or to a local grid, when the energy has been generated it must be delivered to a point of usage - and cannot be stored. With regard to wind generation, it is the UK that has the highest production within Europe. The fact remains that in the UK, there exists the ability to realise 10 percent of our electricity requirement from wind power - as opposed to the current value of just 1 percent. Frankly, electricity can be realised from as little as 2p per kWh - as opposed to the current level of 2-10 p per kWh. Because of this, it is estimated that it takes between half a year to three quarters of a year to cover the installation costs.

Lastly, we have a discipline that the UK does well - namely Hydropower. Although new in its approach, the act of harnessing energy from water has been going on for a long time. It is this type of energy production that could meet 2 percent of all the UK's demand.

A hydropower system uses a turbine to create energy from moving water. By using a dam or a natural river drop, these turbines do not require water storage. 'Micro-Hydro' however utilises old outdated sluices and dams. Having said that, this process could still generate 200mW of the National Capacity. Installing systems like this could cost between 200 pounds and 3k per kW of energy created.

The demand on 'Green Energy' continues to develop - in light of the energy demands worldwide. To be fair, the UK domestic market is actually leading the resurgence, with a variety of schemes.

Electrician and Plumbers are thought to be key in providing expertise during domestic installations. Grants and financial aid is also set to increase within the EEC and the UK - as 'Green Energy' gets ever higher status. It is important to gain the correct qualifications to install these items. Electrical or plumbing training that incorporates green technology could be very useful for the future.