首頁Wear parts
<p>The Lippmann Jaw Crusher is fantastic for fixed, skid-mounted, or portable and mobile principal crushing applications. Examine the increased output, reliability, decreased operating costs and flexibility of a Lippmann Jaw. Its significant supply starting, and force-feeding action from the downward and inward unusual movement of the swing jaw, means increased capability. A bigger eccentric throw create a reduction in nip angle, and longer, rounded jaw dies, a non-choking crushing action design, a more positive mouthful, and larger percentage of reduction. A Lippmann Jaw might have a smaller launch environment, allowing for an increased level of mobility with associated equipment. Good establishing change is easy.</p>
<p>The largest progress in spool crusher reliability has been noticed in the use of hydraulics to guard crushers from being ruined when uncrushable things enter the crushing step. International things, such as aluminum, may cause added costs in lost production, and extensive damage to a crusher. The advance of hydraulic relief techniques has drastically reduced downtime and enhanced living of the machines.</p>
<p>VSI crushers broadly speaking utilize a high speed rotating rotor at the middle of the crushing step and an outside impression surface of either coarse immune metal anvils or crushed stone. Applying toss steel areas 'anvils' is typically known as a and Anvil VSI." Using crushed rock on the outside surfaces of the crusher for fresh rock to be crushed against is usually called "rock on rock VSI." VSI crushers can be used in static seed set-up or in portable tracked equipment.</p>
<p>Some crushers are mobile and can grind stones (as large as 60 inches). Generally used in-pit at the quarry face these devices are ready to go with the huge infeed machines (primarily scoops) to raise the tonnage produced. In a mobile road procedure, these smashed boulders are directly combined with concrete and concrete which are then settled to a road surface. This eliminates the requirement for carrying over-sized material to a stationary crusher and then right back to the highway surface.</p>
<p>A gyratory crusher is comparable in fundamental idea to a jaw crusher, composed of a surface and a head both surfaces are usually lined with manganese steel surfaces. The internal cone includes a small round movement, but does not move the movement is generated by a peculiar agreement. As with the jaw crusher, product trips downward between the two areas being gradually crushed until it's small enough to fallout through the space between the two surfaces.</p>
<p>A spool crusher is suitable for crushing a selection of mid-hard and above mid-hard ores and rocks. It's the benefit of high efficiency, reliable structure, easy modification and lower working costs. The spring release system of a cone crusher acts an overload protection which allows tramp to pass through the crushing step without harm to the crusher.</p>
