Hurley

In the past few years, it was commonly believed that a lot of chimney related fires in a building with a thatched roof were brought on by embers and sparks from an open fire. However, it has since been discovered that even though these embers can of course cause a fire, it is much more likely that a fire is caused by the heat which is carried from a solid fuel stove via the chimney bricks to the underside of the thatch.

A single skin of brick is actually able to pass as much as 85% of the flue gas temperature to the outer surface of a chimney. The heat is then transferred to the thatched roof, and when this heat is sustained at about 200 degrees, a thatch fire can be easily caused by this. However, conventional luxury open fires have substantial quantities of cool air from the area the fire is situated in that may help to cool the entire flue gas temperature. This reduces the risk of thatched roof fire.

Although stoves tend to be believed to be much more fuel efficient than actual fires and fireplaces, it is worth taking into consideration the fire hazard of getting this kind of appliance in a building with a thatched roof. Many insurance companies will refuse to cover a home which has a thatched roof and a range, or indeed they will charge extremely high premiums. The homeowner may find they will get a more affordable insurance plan if they use real fires and fireplaces as an alternative.

So as to cut back the danger of fire and to keep homes safe when working with modern heating appliances, there are a variety of security points which may be considered. For example, chimneys should be swept by a professional chimney sweep on a regular basis and the chimney liner should be routinely inspected to make sure no tar deposits are building up. register plates

When homeowners choose to change their primary source of heat, they should take advice and guidance from a specialist who should be able to guide them on not just the most effective appliance because of their home, but also the safest.