查看“Quarry”的源代码




&lt;p&gt;For the most part improvements in crusher style have moved slowly. Chin crushers have remained almost unchanged for sixty years. Higher and more consistency output have been included with basic spool crusher designs that have also remained largely unaffected. Increases in twisting pace have provided the biggest variance. For although exactly the same size crusher manufactured currently may produce 300 tons/h, instance, a inch (120 cm) spool crusher manufactured in 1960 may be able to produce 170 tons/h of crushed stone. These production improvements come from rate increases and better smashing step designs.&lt;/p&gt;



[http://lippmann-milwaukee.com/new-equipment-old/mobile-track-plant/ Skid mounted crusher]



&lt;p&gt;The biggest advance in spool crusher consistency has been observed in the usage of hydraulics to safeguard crushers from being damaged when uncrushable objects enter the crushing step. Dangerous objects, such as metal, may cause considerable harm to a crusher, and additional costs in lost output. The progress of hydraulic comfort techniques has considerably reduced downtime and enhanced the life span of those machines.&lt;/p&gt;





&lt;p&gt;The Rotating Screen Effect: The interlaced toothed rotor design enables free moving undersize content to pass through the continually changing breaks made by the relatively slow moving shafts.&lt;/p&gt;





&lt;p&gt;Functioning, the raw material (of various dimensions) is usually delivered to the main crusher's hopper by dump trucks, excavators or wheeled front-end loaders. A feeder device such being an apron feeder, conveyor or moving grid controls the rate at which this material enters the crusher, and frequently contains a preliminary screening device which enables smaller material to avoid the crusher itself, hence increasing efficiency. Main crushing lowers the big parts to a measurement which may be handled by the downstream machinery.&lt;/p&gt;



[http://lippmann-milwaukee.com/new-equipment/ Electric crusher]



&lt;p&gt;A cone crusher is comparable in operation to a crusher, with less steepness in the crushing chamber and more of a concurrent zone between crushing areas. A cone crusher pauses rock by squeezing the rock between an gyrating spindle, which is covered by the enclosing concave hopper, and a wear resistant mantle, covered by a manganese concave or a serving boat. As rock enters the top of the cone crusher, the rock becomes wedged and squeezed between the mantle and the bowl lining or concave. Huge items of ore are broken after, and then drop to a reduced position (because they are now smaller) where they are broken again. This method continues until the pieces are small enough to slip through the narrow opening at the base of the crusher.&lt;/p&gt;





&lt;p&gt;Impact crushers include the use of effect rather than force to break substance. The material is included within a cage, with spaces on the bottom, end, or side of the preferred size to permit pulverized material to escape. This sort of crusher is generally used with soft and non-abrasive material such as coal, seeds, limestone, gypsum or soft metallic ores. There are two kinds of effect crushers: outside shaft impactor and vertical shaft impactor.&lt;/p&gt;